From the daily commute to gravel roads and weekend tracks, the New Mutant X-AT brings an all-terrain tread to everyday driving. Deep siping, staggered shoulder lugs and a variable-pitch pattern balance loose-surface traction with the comfort and road manners you want between adventures.
Features and cover vary by size and fitment. Mileage cover applies to eligible sizes up to 22-inch rims and 13.5-inch width, with rotation and service-record conditions. Ask Traction Tyres to confirm the NZ road-hazard benefit before purchase. Read warranty terms & tyre-care requirements ↗
FIND YOUR PREDATOR
EVERYDAY ROADS. WEEKEND TRACKS.
Choose the X-AT when your ute or SUV spends plenty of time on sealed roads but still needs to handle gravel, campsites and unsealed access tracks. Its wider contact patch and closely arranged tread blocks give it a more road-focused character within the New Mutant off-road range. The silica-based compound, grooves and siping are designed to support grip across changing surfaces.
PREDATOR / X-AT
DAILY DRIVE. WEEKEND ESCAPE.
All-terrain capability for the weekday kilometres and the road beyond the campsite.
A wider contact patch supports handling stability, while the advanced X-shaped tread uses pitch variation to help reduce road noise on sealed surfaces.
02 /
GRIP BEYOND THE SEAL
Deep grooves and fine sipes work with staggered shoulder lugs to provide additional edges for traction on wet roads, loose gravel and rocky ground.
03 /
SPIKE SIDEWALL STYLING
The dual sidewall design adds a distinctive look and extra off-road traction features around the shoulder. Confirm the construction and winter markings for your chosen size.
Compare the exact size, load rating, wheel diameter and UTQG grade. Open Full specs for approved rim widths, construction information and available supplier dimensions.
NZ listed range. These retail listings are separate from the wider supplier catalogue below. A listing is not a live stock count; confirm supply before ordering. Explore the wider supplier range ↓
19 size / specification options
New Mutant X-AT NZ size and specification listings
¹ UTQG is shown as treadwear / traction / temperature. Specifications vary by size and version; actual sidewall ply is confirmed individually. Supplier dimensions are nominal. NZ catalogue: 24 October 2026; listings are not a live stock count. Confirm current supply and fitment before ordering.
Understanding rim sizes, ply ratings & UTQG
WHEEL & RIM SIZE
The number after R is the wheel diameter in inches. Approved rim width is a separate measurement: the width of the wheel this exact tyre specification can be fitted to. Standard rim is the supplier’s measuring-rim reference.
SIDEWALL PLY & LOAD RATING
PR describes load-carrying capacity; it does not count the physical layers in a sidewall. XL means extra load. Actual sidewall ply must be confirmed from the exact tyre’s construction marking. A “3-ply, selected sizes” badge does not apply to every size.
UTQG GRADES
The three values are treadwear, traction and temperature grades, in that order. Treadwear is a comparative rating, not a kilometre warranty. “Not listed” means no grade is supplied here; it is not a zero rating. Ask us to check the actual tyre where “Confirm grade” is shown.
EXACT FITMENT MATTERS
Compare the full size, load index, speed symbol and load designation. Dimensions and tread depth are nominal supplier figures and can vary by version. The team can check your wheel width and vehicle requirements before you order.
EXPLORE THE WIDER RANGE
OCTOBER SUPPLIER CATALOGUE.
96 supplier part numbers · 102 factory / specification entries
Explore sizes beyond the regular NZ range. A catalogue listing is not a stock or delivery promise. Catalogue-only entries are not currently listed as NZ stock or confirmed on order. Ask us about supply before making plans.
On order Matched to a recorded NZ order. ETA and allocation still need confirmation.
NZ range — check version A matching size and rating is listed locally. Confirm the exact version and current stock.
Supplier catalogue only Ask your retailer to arrange supply and confirm lead time.
Browse 102 supplier specification entries Sizes, finishes & full specs
102 specification entries
New Mutant X-AT — supplier sizes and specifications, October 2026
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT87R
Factory version
Vietnam
Wheel diameter
14 in
Approved rim width
5.5–7.0 in
Measuring rim
7J
Load / speed
95Q
Load designation
6PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
674 mm
Section width
218 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
689 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS19
Factory version
Cambodia
Wheel diameter
15 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
104/101Q
Load designation
6PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
733 mm
Section width
235 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
900 kg
Maximum load, dual (supplier)
826 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT72R
Factory version
Vietnam
Wheel diameter
15 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
109S
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
733 mm
Section width
235 mm
New tread depth
9.2 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1030 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXATST07R
Factory version
Vietnam
Wheel diameter
15 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
116/113S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
733 mm
Section width
235 mm
New tread depth
10.3 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Maximum load, dual (supplier)
1150 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
NPRXATS2
Factory version
Cambodia
Wheel diameter
16 in
Approved rim width
6.0–7.5 in
Measuring rim
6J
Load / speed
115/112S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
744 mm
Section width
223 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Listed
Maximum load, single (supplier)
1216 kg
Maximum load, dual (supplier)
1120 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT74R
Factory version
Vietnam
Wheel diameter
16 in
Approved rim width
6.0–8.0 in
Measuring rim
7J
Load / speed
106T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
736 mm
Section width
240 mm
New tread depth
9.2 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
950 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
NPRXATS3
Factory version
Cambodia
Wheel diameter
16 in
Approved rim width
6.0–7.5 in
Measuring rim
6 1/2J
Load / speed
120/116S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
806 mm
Section width
235 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1380 kg
Maximum load, dual (supplier)
1260 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
NPRXATS4
Factory version
Cambodia
Wheel diameter
16 in
Approved rim width
6.5–8.0 in
Measuring rim
7J
Load / speed
111T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
750 mm
Section width
248 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1090 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS22
Factory version
Cambodia
Wheel diameter
16 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
112S
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
778 mm
Section width
272 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Listed
Maximum load, single (supplier)
1120 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
NPRXATS5
Factory version
Cambodia
Wheel diameter
16 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
112T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
778 mm
Section width
272 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1120 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS6
Factory version
Cambodia
Wheel diameter
16 in
Approved rim width
7.0–9.0 in
Measuring rim
7 1/2J
Load / speed
116T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
804 mm
Section width
267 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT78R
Factory version
Vietnam
Wheel diameter
16 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
126/123Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
834 mm
Section width
286 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT08SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT09SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8 1/2J
Load / speed
121R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
268 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT68
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.5–10.0 in
Measuring rim
9J
Load / speed
128Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
290 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT10SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
8.0–10.5 in
Measuring rim
10J
Load / speed
121R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT66
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
8.0–10.5 in
Measuring rim
10J
Load / speed
128Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT79R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
120/117Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
808 mm
Section width
235 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1331 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS7
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
120/117S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
808 mm
Section width
235 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS9
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
6.5–8.0 in
Measuring rim
7J
Load / speed
119/116S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
776 mm
Section width
248 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Maximum load, dual (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT80R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
6.5–8.0 in
Measuring rim
7J
Load / speed
121/118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
800 mm
Section width
248 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS10
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
6.5–8.0 in
Measuring rim
7J
Load / speed
121/118S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
800 mm
Section width
248 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRXAT03SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
115S
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
804 mm
Section width
272 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1215 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT82
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
115T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
804 mm
Section width
272 mm
New tread depth
9.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1215 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT84R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
118/115Q
Load designation
8PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Maximum load, dual (supplier)
1216 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT04SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
121/118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT88SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
123/120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT83
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
123/120S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT06SF
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
121/118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
832 mm
Section width
292 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT16SF
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
123R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
NPRXATS12
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
6.5–8.5 in
Measuring rim
7J
Load / speed
107H
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
739 mm
Section width
240 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
975 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS21
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.0–8.5 in
Measuring rim
7J
Load / speed
109T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
751 mm
Section width
248 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
925 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
NPRXATS14
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
114T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
775 mm
Section width
272 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1060 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
NPRXATS15
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
116T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
801 mm
Section width
272 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS17
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
124/121S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
829 mm
Section width
272 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1599 kg
Maximum load, dual (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
NPRXATS16
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
116T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
815 mm
Section width
279 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT12SF
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
125/122R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
843 mm
Section width
279 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Maximum load, dual (supplier)
1499 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT13SF
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
8.5–10.0 in
Measuring rim
8 1/2J
Load / speed
125/122R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
827 mm
Section width
292 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Maximum load, dual (supplier)
1499 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT23SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–10.5 in
Measuring rim
9J
Load / speed
118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
290 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT25SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
114Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT25SF
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
114Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT26SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
119Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT26SF
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
119Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT26SFR
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
119Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXAT24
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–10.5 in
Measuring rim
9J
Load / speed
124R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
290 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1599 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT27SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
121Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT27SF
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
121Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT28SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
125Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT28SF
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
125Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT28SFR
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
125Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT63
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
128Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT29SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
9.5–12.0 in
Measuring rim
11J
Load / speed
128Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
345 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT70
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
111T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
774 mm
Section width
277 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1090 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT70
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
111T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
774 mm
Section width
277 mm
New tread depth
9.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1090 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT17SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
117T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
810 mm
Section width
284 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1285 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT17SF
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
117T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
810 mm
Section width
284 mm
New tread depth
9.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1285 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT17SFR
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
117T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
810 mm
Section width
284 mm
New tread depth
9.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1285 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT18SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–9.5 in
Measuring rim
8 1/2J
Load / speed
120/117Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
810 mm
Section width
284 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT19SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
115T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
838 mm
Section width
279 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1215 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXAT20
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
123/120R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
838 mm
Section width
279 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXAT21
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
126/123R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
866 mm
Section width
279 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT22SF
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.0 in
Measuring rim
9J
Load / speed
122/119Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
822 mm
Section width
297 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1499 kg
Maximum load, dual (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT60
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.0 in
Measuring rim
8 1/2J
Load / speed
125/122R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
850 mm
Section width
292 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Maximum load, dual (supplier)
1499 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXATS18
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.0 in
Measuring rim
8 1/2J
Load / speed
127/124R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
878 mm
Section width
292 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1751 kg
Maximum load, dual (supplier)
1599 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT61
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.5 in
Measuring rim
8 1/2J
Load / speed
126/123S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
862 mm
Section width
299 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT62
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.5 in
Measuring rim
8 1/2J
Load / speed
129/126P
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
892 mm
Section width
299 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1851 kg
Maximum load, dual (supplier)
1701 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT32SF
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.0–12.0 in
Measuring rim
10J
Load / speed
109R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
316 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1030 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT33SF
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.0–12.0 in
Measuring rim
10J
Load / speed
114Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
316 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRXAT34SF
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
117R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT35SF
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
121Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT36SF
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
9.5–12.0 in
Measuring rim
11J
Load / speed
128Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
345 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT30SF
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
9.0–10.5 in
Measuring rim
9 1/2J
Load / speed
114T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
815 mm
Section width
285 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1180 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT69
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–10.0 in
Measuring rim
9J
Load / speed
124/121S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
873 mm
Section width
297 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1599 kg
Maximum load, dual (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
NPRXAT31
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.0–12.0 in
Measuring rim
11J
Load / speed
114H
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
803 mm
Section width
313 mm
New tread depth
9.6 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1180 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT64
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
10.5–12.5 in
Measuring rim
11 1/2J
Load / speed
106Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
320 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
950 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT37SF
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
11.5–12.5 in
Measuring rim
12 1/2J
Load / speed
113Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
345 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1150 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT65SF
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
10.0–12.0 in
Measuring rim
10 1/2J
Load / speed
116Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
316 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT38SF
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
11.5–13.5 in
Measuring rim
12J
Load / speed
116Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
341 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT39SF
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
9.5–12.0 in
Measuring rim
11J
Load / speed
124Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
345 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1599 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT42SF
Factory version
Cambodia
Wheel diameter
26 in
Approved rim width
11.0–12.0 in
Measuring rim
11 1/2J
Load / speed
115Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
316 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT43SF
Factory version
Cambodia
Wheel diameter
26 in
Approved rim width
9.5–11.5 in
Measuring rim
10J
Load / speed
117Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
318 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRXAT40SF
Factory version
Cambodia
Wheel diameter
26 in
Approved rim width
10.5–13.0 in
Measuring rim
11J
Load / speed
117Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
341 mm
New tread depth
12.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
No matching catalogue entry. Clear your filters or Find a dealer ↗.
¹ UTQG: treadwear / traction / temperature. Actual sidewall ply is not specified in this catalogue. Factory versions are kept separate where specifications differ. Source: Predator October 2026 supplier catalogue. Order status checked 29 October 2026; confirm current availability with the NZ team.
PREDATOR / X-AT
PRODUCT VIEWS & DESIGN DETAILS.
8 images · Explore the tread, sidewalls and design details. Select an image for a closer look.
Product views & design details
8 images
Colour highlights identify design features in Predator’s illustrations. Tyres are supplied in black.
PREDATOR / ON FILM
X-AT IN MOTION.
See the New Mutant X-AT in Predator’s own all-terrain campaign film.