The New Mutant RT Trail is a rugged-terrain hybrid with a clear appetite for adventure. It brings together elements of the X-RT and X-MT, using deep siped blocks, substantial shoulder lugs and an open tread layout for drivers who travel from sealed roads onto demanding tracks.
Features and cover vary by size and fitment. Mileage cover applies to eligible sizes up to 22-inch rims and 13.5-inch width, with rotation and service-record conditions. Ask Traction Tyres to confirm the NZ road-hazard benefit before purchase. Read warranty terms & tyre-care requirements ↗
FIND YOUR PREDATOR
MAKE ROOM FOR THE ROUGHER ROUTE.
RT Trail is its own pattern within the New Mutant family. Its tread combines off-road features with pitch variation intended to moderate road noise between trail sections. Deep grooves and siping provide numerous traction edges, while the substantial shoulder and sidewall lugs carry the rugged design beyond the centre of the tread. Consider it for a touring ute or 4WD that needs to cover road kilometres as well as tackle loose and uneven terrain.
PREDATOR / RT TRAIL
PACK UP. HEAD FURTHER OUT.
Rugged-terrain character for touring setups, everyday driving and weekends off-grid.
An intermediate void ratio leaves space between the tread blocks to clear loose material. Pitch variation helps manage road noise during the journey to the track.
02 /
DEEP GROOVES AND SIPING
Deep, multi-purpose grooves and fine cuts in the tread blocks add traction edges for changing road and trail conditions, supported by an all-terrain tread compound.
03 /
SUBSTANTIAL SHOULDER DETAIL
Three-dimensional shoulder and sidewall lugs add biting surfaces around the tyre. The dual sidewall design gives RT Trail a character distinct from the X-RT and X-MT.
Compare the exact size, load rating, wheel diameter and UTQG grade. Open Full specs for approved rim widths, construction information and available supplier dimensions.
NZ listed range. These retail listings are separate from the wider supplier catalogue below. A listing is not a live stock count; confirm supply before ordering. Explore the wider supplier range ↓
5 size / specification options
New Mutant RT Trail NZ size and specification listings
Sidewall construction confirmed for this NZ range size and load rating. Dimensions are nominal and are not a vehicle-fitment guarantee. Find a dealer ↗
Sidewall construction confirmed for this NZ range size and load rating. Dimensions are nominal and are not a vehicle-fitment guarantee. Find a dealer ↗
Confirm the actual sidewall construction with the team before ordering. Dimensions are nominal and are not a vehicle-fitment guarantee. Find a dealer ↗
Sidewall construction confirmed for this NZ range size and load rating. Dimensions are nominal and are not a vehicle-fitment guarantee. Find a dealer ↗
Sidewall construction confirmed for this NZ range size and load rating. Dimensions are nominal and are not a vehicle-fitment guarantee. Find a dealer ↗
No matching listing in this range.
Try a different size or clear the wheel filter. A Predator retailer can help with another specification.
¹ UTQG is shown as treadwear / traction / temperature. Specifications vary by size and version; actual sidewall ply is confirmed individually. Supplier dimensions are nominal. NZ catalogue: 24 October 2026; listings are not a live stock count. Confirm current supply and fitment before ordering.
Understanding rim sizes, ply ratings & UTQG
WHEEL & RIM SIZE
The number after R is the wheel diameter in inches. Approved rim width is a separate measurement: the width of the wheel this exact tyre specification can be fitted to. Standard rim is the supplier’s measuring-rim reference.
SIDEWALL PLY & LOAD RATING
PR describes load-carrying capacity; it does not count the physical layers in a sidewall. XL means extra load. Actual sidewall ply must be confirmed from the exact tyre’s construction marking. A “3-ply, selected sizes” badge does not apply to every size.
UTQG GRADES
The three values are treadwear, traction and temperature grades, in that order. Treadwear is a comparative rating, not a kilometre warranty. “Not listed” means no grade is supplied here; it is not a zero rating. Ask us to check the actual tyre where “Confirm grade” is shown.
EXACT FITMENT MATTERS
Compare the full size, load index, speed symbol and load designation. Dimensions and tread depth are nominal supplier figures and can vary by version. The team can check your wheel width and vehicle requirements before you order.
EXPLORE THE WIDER RANGE
OCTOBER SUPPLIER CATALOGUE.
76 supplier part numbers · 85 factory / specification entries
Explore sizes beyond the regular NZ range. A catalogue listing is not a stock or delivery promise. Catalogue-only entries are not currently listed as NZ stock or confirmed on order. Ask us about supply before making plans.
On order Matched to a recorded NZ order. ETA and allocation still need confirmation.
NZ range — check version A matching size and rating is listed locally. Confirm the exact version and current stock.
Supplier catalogue only Ask your retailer to arrange supply and confirm lead time.
Browse 85 supplier specification entries Sizes, finishes & full specs
85 specification entries
New Mutant RT Trail — supplier sizes and specifications, October 2026
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT83
Factory version
Vietnam
Wheel diameter
14 in
Approved rim width
5.5–7.0 in
Measuring rim
7J
Load / speed
95Q
Load designation
6PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
674 mm
Section width
218 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
689 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT59R
Factory version
Vietnam
Wheel diameter
15 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
104/101Q
Load designation
6PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
733 mm
Section width
235 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
900 kg
Maximum load, dual (supplier)
826 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT60R
Factory version
Vietnam
Wheel diameter
16 in
Approved rim width
6.5–8.0 in
Measuring rim
7J
Load / speed
120/116Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
774 mm
Section width
248 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1380 kg
Maximum load, dual (supplier)
1260 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT61R
Factory version
Vietnam
Wheel diameter
16 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
121/118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
778 mm
Section width
272 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT63R
Factory version
Vietnam
Wheel diameter
16 in
Approved rim width
7.0–9.0 in
Measuring rim
7 1/2J
Load / speed
119/116Q
Load designation
8PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
267 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Maximum load, dual (supplier)
1250 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRRT07
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT47
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.5–10.0 in
Measuring rim
9J
Load / speed
128Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
290 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT08
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
8.0–10.5 in
Measuring rim
10J
Load / speed
125R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT50
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
9.0–11.5 in
Measuring rim
11J
Load / speed
128Q
Load designation
8PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
1004 mm
Section width
345 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT03
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
120/117Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
808 mm
Section width
235 mm
New tread depth
13.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT03R
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
6.0–8.0 in
Measuring rim
6 1/2J
Load / speed
120/117Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
808 mm
Section width
235 mm
New tread depth
13.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT04
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
6.5–8.0 in
Measuring rim
7J
Load / speed
121/118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
800 mm
Section width
248 mm
New tread depth
13.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT67
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
120/117Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
776 mm
Section width
272 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT66R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
115T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
804 mm
Section width
272 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1215 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRRT05
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
123/120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRRT05
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
123/120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRRT05R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
123/120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
804 mm
Section width
272 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
PRRT06
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
126/123Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
832 mm
Section width
292 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
PRRT06
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
126/123Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
832 mm
Section width
292 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
PRRT06R
Factory version
Cambodia
Wheel diameter
17 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
126/123Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
832 mm
Section width
292 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Check ordered version. This size and rating appear on an order; the factory version or sidewall finish needs confirmation.
Supplier part
PRRT06R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
126/123Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
832 mm
Section width
292 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT70R
Factory version
Vietnam
Wheel diameter
17 in
Approved rim width
8.0–10.5 in
Measuring rim
9 1/2J
Load / speed
126/123Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
874 mm
Section width
323 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT11
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT12
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
123R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT71
Factory version
Vietnam
Wheel diameter
18 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
114S
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
775 mm
Section width
272 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1180 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT72
Factory version
Vietnam
Wheel diameter
18 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
119/116Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
775 mm
Section width
272 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Maximum load, dual (supplier)
1250 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT73
Factory version
Vietnam
Wheel diameter
18 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
116T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
801 mm
Section width
272 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT09
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
123/120Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
815 mm
Section width
279 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT10
Factory version
Cambodia
Wheel diameter
18 in
Approved rim width
7.0–9.0 in
Measuring rim
8J
Load / speed
125/122R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
843 mm
Section width
279 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Maximum load, dual (supplier)
1499 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT75
Factory version
Vietnam
Wheel diameter
18 in
Approved rim width
8.5–10.0 in
Measuring rim
8 1/2J
Load / speed
118/115Q
Load designation
8PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
799 mm
Section width
292 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Maximum load, dual (supplier)
1216 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT74
Factory version
Vietnam
Wheel diameter
18 in
Approved rim width
8.5–10.0 in
Measuring rim
8 1/2J
Load / speed
122/119Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
799 mm
Section width
292 mm
New tread depth
11.0 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1499 kg
Maximum load, dual (supplier)
1361 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT76R
Factory version
Vietnam
Wheel diameter
18 in
Approved rim width
7.5–10.0 in
Measuring rim
8 1/2J
Load / speed
129/126Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
871 mm
Section width
299 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1851 kg
Maximum load, dual (supplier)
1701 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT46
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–10.5 in
Measuring rim
9J
Load / speed
118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
290 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT01
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
114Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT01
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
114Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT02
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
119Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
The supplier’s diameter entry needs confirmation for this version.
Supplier part
PRRT02
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
119Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
Confirm with supplier
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT22
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–10.5 in
Measuring rim
9J
Load / speed
124Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
290 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1599 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT23
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
121Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT23
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
121Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT24
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
125Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT24
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
125Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT26
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
9.5–12.0 in
Measuring rim
11J
Load / speed
126Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
345 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1701 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT49
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
7.5–10.0 in
Measuring rim
9J
Load / speed
128Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
290 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT25
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
128Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT25R
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
128Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
928 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT27
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
11.0–14.0 in
Measuring rim
12 1/2J
Load / speed
128Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
953 mm
Section width
395 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1801 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT13
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
117T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
600 / A / B
Overall diameter
810 mm
Section width
284 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1285 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT13
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
117T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
500 / A / B
Overall diameter
810 mm
Section width
284 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1286 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT14
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–9.5 in
Measuring rim
8 1/2J
Load / speed
120/117S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
810 mm
Section width
284 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT15
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
7.5–9.5 in
Measuring rim
8J
Load / speed
115T
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
600 / A / B
Overall diameter
838 mm
Section width
279 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1215 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT53
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
123/120S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
838 mm
Section width
279 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1549 kg
Maximum load, dual (supplier)
1399 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT16
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–9.5 in
Measuring rim
8J
Load / speed
126/123S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
866 mm
Section width
279 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1701 kg
Maximum load, dual (supplier)
1549 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRRT17
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.0–10.0 in
Measuring rim
9J
Load / speed
116T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
600 / A / B
Overall diameter
822 mm
Section width
297 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
NZ range — check version. A matching size and rating is listed in the NZ range. Confirm stock, finish and exact factory specification.
Supplier part
PRRT18
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.0 in
Measuring rim
9J
Load / speed
122/119S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
822 mm
Section width
297 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1499 kg
Maximum load, dual (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT19
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–10.0 in
Measuring rim
8 1/2J
Load / speed
127/124S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
878 mm
Section width
292 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1751 kg
Maximum load, dual (supplier)
1599 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT77R
Factory version
Vietnam
Wheel diameter
20 in
Approved rim width
8.5–10.5 in
Measuring rim
8 1/2J
Load / speed
129/126Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Raised white lettering
UTQG: wear / traction / temperature
Not listed
Overall diameter
892 mm
Section width
299 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1851 kg
Maximum load, dual (supplier)
1701 kg
Supplier release status
Oct,2026
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT20
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
8.5–11.0 in
Measuring rim
9 1/2J
Load / speed
116R
Load designation
Not specified
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
600 / A / B
Overall diameter
844 mm
Section width
316 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT21
Factory version
Cambodia
Wheel diameter
20 in
Approved rim width
9.0–11.0 in
Measuring rim
9 1/2J
Load / speed
125/122Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
844 mm
Section width
316 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1651 kg
Maximum load, dual (supplier)
1499 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT31
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.0–12.0 in
Measuring rim
10 1/2J
Load / speed
109Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
316 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1030 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT32
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.0–12.0 in
Measuring rim
10 1/2J
Load / speed
114Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
316 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT33
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.5–12.0 in
Measuring rim
11J
Load / speed
114Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
345 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1179 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT34
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
12.5–14.0 in
Measuring rim
13J
Load / speed
115Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
385 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1216 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT35
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
117Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT36
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–11.0 in
Measuring rim
10J
Load / speed
121Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
318 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT37
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
10.5–12.0 in
Measuring rim
11J
Load / speed
122Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
345 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1499 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT28
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
116H
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
600 / A / B
Overall diameter
835 mm
Section width
284 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT57
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
7.5–9.5 in
Measuring rim
8 1/2J
Load / speed
116T
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
600 / A / B
Overall diameter
835 mm
Section width
284 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT29
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–10.0 in
Measuring rim
9J
Load / speed
121/118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
845 mm
Section width
297 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1449 kg
Maximum load, dual (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT54
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
8.5–10.0 in
Measuring rim
9J
Load / speed
124/121S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
873 mm
Section width
297 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1599 kg
Maximum load, dual (supplier)
1449 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT55
Factory version
Cambodia
Wheel diameter
22 in
Approved rim width
9.0–11.0 in
Measuring rim
9 1/2J
Load / speed
122/119S
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
895 mm
Section width
316 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
EV-ready designation
Listed by supplier
Maximum load, single (supplier)
1499 kg
Maximum load, dual (supplier)
1361 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT39
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
11.5–12.5 in
Measuring rim
12J
Load / speed
113Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
345 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1150 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT40
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
12.5–14.0 in
Measuring rim
13J
Load / speed
118Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
826 mm
Section width
341 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1059 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT41
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
11.5–13.5 in
Measuring rim
12J
Load / speed
116Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
341 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1250 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT42
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
12.5–14.0 in
Measuring rim
13J
Load / speed
118Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
367 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT43
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
13.0–15.5 in
Measuring rim
14J
Load / speed
117Q
Load designation
12PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
877 mm
Section width
394 mm
New tread depth
14.7 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1320 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT38
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
9.5–11.0 in
Measuring rim
10J
Load / speed
112H
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
838 mm
Section width
290 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1120 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT56
Factory version
Cambodia
Wheel diameter
24 in
Approved rim width
9.5–11.0 in
Measuring rim
10J
Load / speed
120/117R
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
876 mm
Section width
296 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1399 kg
Maximum load, dual (supplier)
1286 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT44
Factory version
Cambodia
Wheel diameter
26 in
Approved rim width
10.5–11.5 in
Measuring rim
11J
Load / speed
109H
Load designation
XL
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
844 mm
Section width
313 mm
New tread depth
10.8 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1030 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
Supplier catalogue only. Not listed as NZ stock or on a confirmed NZ order. Ask about future supply.
Supplier part
PRRT48
Factory version
Cambodia
Wheel diameter
26 in
Approved rim width
10.0–12.0 in
Measuring rim
11J
Load / speed
108/104Q
Load designation
10PR
Actual sidewall ply
Confirm for this size
Sidewall finish
Black sidewall
UTQG: wear / traction / temperature
Not listed
Overall diameter
874 mm
Section width
313 mm
New tread depth
13.1 mm
Construction
Tubeless
3PMSF
Not listed
Maximum load, single (supplier)
1000 kg
Maximum load, dual (supplier)
900 kg
Supplier release status
Released
Dimensions are nominal supplier figures. PR is a load rating, not the number of sidewall layers. Catalogue release status does not establish NZ availability. Confirm the exact version and fitment before ordering.
No matching catalogue entry. Clear your filters or Find a dealer ↗.
¹ UTQG: treadwear / traction / temperature. Actual sidewall ply is not specified in this catalogue. Factory versions are kept separate where specifications differ. Source: Predator October 2026 supplier catalogue. Order status checked 29 October 2026; confirm current availability with the NZ team.
PREDATOR / RT TRAIL
PRODUCT VIEWS & DESIGN DETAILS.
12 images · Explore the tread, sidewalls and design details. Select an image for a closer look.
Product views & design details
10 images
Colour highlights identify features in Predator’s design illustrations. Tyres are supplied in black.